8
Configure Audio
CV Enable/Disable
System Notes
No Calibration Required.
ESD Safe
–
AC ground monitor detects power line ground failures
and immediately alerts the operator and shuts down the system.
Surface Resistivity
–
10
6
Ω
-10
11
Ω
Sleep Timer
10-120 Min
10 Min Segments
Press to
Resume
Operation
°F/°C Select
Tip Cleaning
Reminder
0, 10-200 Sec
1 Sec Segments
Press to
Resume
Operation
Password Protection & Supervisor Setup
Default
password:
0000
Changing the default password will enable Supervisor mode, allowing the Supervisor to assign three user passwords
Select
Change Password
Exit to save
Select
Assign Password
Exit to save
Select user &
Cycle Power
Power On
Enter User Password
Active User
=1
=2
=3
=
•
The auto sleep indicator “S” may not display with certain small tip
geometries and low temperatures.
•
All hand pieces will enter Sleep Mode when placed in the workstand,
regardless of the absence of a notification on the screen. (Indicated by
the “S” symbol.)
•
Hand-pieces out of the workstand and at idle power
will display “S” as
to indicate the sleep timer countdown has started
Summary of Contents for CV-PS500
Page 80: ...80 ...
