10
INSTRUCTIONS TO REPLACE #1 CHAIN
REMOVE #1 CHAIN
1. Remove the cotter pin that link #1 chain to the long nut as shown below
2. Remove chains #4 and shaft assemblies from the assembly.
Put them aside until the #1 chain is installed back
3. Remove the c-clip and the pin to detach chain #2 from the I-BMDPL’s base
4. Pull on the first mast until the first, second and third mast come all the way out of the base
5. Remove the cotter pin that link the #1 chain and the bottom portion of the first mast
C-CLIP
FIRST MAST
FIRST MAST
1
LONG NUT
COTTER PIN
1
2
2
SHAFT
ASSEMBLIES
SHAFT
ASSEMBLIES
CHAIN #4
3
3
6
COTTER PIN
6
