12
INSTRUCTION TO REPLACE #1 CHAIN
INSTALL #1 CHAIN
4. Slide the first mast in the base while making sure that the #1 chain stays accessible
5. Pass the free end of the #1 chain around the 10 thoot sprocket and around the central sprocket
of the shaft assembly as shown below
6. Link the free part of the chain to the long nut on the first mast with a pin and a cotter pin
7. Bend the cotter pins to ensure that the chain plates stay in the assembly
8. Link #2 chain with the base of i-bmdpl by putting back the pin and C-CLIP previously removed
9. Slide the three masts in the base
6
SHAFT
ASSEMBLIES
CHAIN #1
10 THOOT SPROCKET
5
C-CLIP
8
8