Troubleshooting
TBS-Series | Version 1.03
11
10 Troubleshooting
11 Disposal, recycling of old equipment
In the interests of the environment, care must be taken to
ensure that all components of the machine are disposed
of in the proper and approved way.
11.1 Decommission
Disused equipment must be taken out of service immedi-
ately in order to avoid later misuse and endangering the
environment or people.
- Dispose of all environmentally hazardous fluids from
the old device.
- If necessary, disassemble the machine into manage-
able and usable components and components.
- Supply the machine components and operating materi-
als to the appropriate disposal channels.
11.2 Disposal of lubricants
Remove the leaking, used or excess grease at the lubri-
cated lubrication points.
The disposal instructions for the lubricants used are pro-
vided by the lubricant manufacturer. If necessary, ask for
the productspecific data sheets.
Maintenance inter
-
val
Maintenance tasks
Before the operation
Oil knife and lubricate hand
lever bearing (grease nip
-
ple)
Before the operation
Lubricate gears
Weekly
Oil down mechanism
Weekly
Lubricate eccentric bearing
Monthly
Lubricate plain bearing of
the back gauge
Fault
Remedy
Burr at the cutting
edge
1. Cutting gap too large, ad
-
just cutting gap.
2. Blunt knives, change
knives
Cut off sheet metal
does not have the set
dimension.
Adjust the stop.
