6
TBS-Series | Version 1.03
Technical Data
Unauthorized modifications or changes to the sheet me
-
tal scissors can invalidate the CE conformity of the sheet
metal scissors and are prohibited. The company Stürmer
Maschinen GmbH assumes no liability for design and
technical changes to the sheet metal scissors.
The improper use of the sheet metal shears as well as
the disregard of the safety regulations or the operating
instructions exclude a liability of the manufacturer for re
-
sulting damage to persons or objects and cause the war
-
ranty to lapse!
3.1 Predictable misuse
When using the sheet metal shears, no reasonably fore
-
seeable misuse is possible if the intended use is obser
-
ved, which could lead to dangerous situations involving
personal injury.
3.2 Residual risks
Even if all safety regulations are adhered to, a residual
risk described below remains with the operation of the
sheet metal shears. All persons working with the sheet
metal scissors must be aware of these residual risks and
follow the instructions that prevent these residual risks
leading to accidents or damage.
- There is a risk of injury to the upper limbs (e.g., hands,
fingers).
- Danger from falling workpieces.
- During set-up and set-up work, it may be necessary to
dismantle on-site protective equipment. This creates
various residual risks and potential dangers that every
operator must be aware of.
4
Technical Data
4.1 Type plate
Fig. 2: Type plate
5
Transport, Packaging, Storage
5.1
Delivery
and Transport
Delivery
After delivery, inspect the sheet metal shears for visible
transport damage. If the sheet metal shears show da
-
mage, they must be reported immediately to the trans
-
port company or the dealer.
WARNING!
Danger in case of misuse!
Misuse of the sheet metal scissors can lead to dan
-
gerous situations.
- Only operate the sheet metal shears in the perfor
-
mance range specified in the technical data.
- Never bypass or override the safety devices.
- Only operate the sheet metal shears in a technically
perfect condition.
Model
TBS 1501-15
TBS 2001-12
Length [mm]
1950
2450
Width [mm]
1100
1100
Height
[mm]
1050
1050
Weight [kg]
455
511
Table height (mm)
684
684
Max. working width
max [mm]
1500
2000
Sheet thickness (400
N/mm²) max.
1,5
1,25
Sheet thickness (700
N/mm²) max.
0,75
0,62
Rear stop adjustment
range up to [mm]
0-300
0-300
