Page of 33
13
1. PROCESS SELECTION
AVOID ACCIDENTAL ARCING
When in the STICK welding mode, the weld output connections of this unit are electrically hot.
To avoid accidental arcing, be mindful of the welding accessories that are connected to the
weld output connections.
Make certain the welding accessories connected to this unit are not touching each other and
are not electrically connected to each other.
a. With the input power switch turned ON, observe which of the Weld Process Indicator
Lights is on.
b. Press the button under the under the weld process indicators until the Weld Process
Indicator Light next to your desired weld process is on.
2. DC STICK SET-UP
AVOID ACCIDENTAL ARCING
When in the STICK welding mode, the weld output connections of this unit are electrically hot.
To avoid accidental arcing, be mindful of the welding accessories that are connected to the
weld output connections.
Make certain the welding accessories connected to this unit are not touching each other and
are not electrically connected to each other.
Weld Process
Indicator Lights
Push to Sequence
Through Weld
Processes
