Page of 33
7
TECHNICAL SPECIFICATIONS
Item
Specification
Power Supply
120V, 20A, 50/60 Hz, Single Phase
230V, 35A, 50/60 Hz, Single Phase
Output No Load Voltage
65V
Rated Duty Cycle
35% @ 200A
DC TIG Output Range
10 - 95A with 120V Input Power
10 - 200A with 230V Input Power
AC TIG Output Range
20 - 95A with 120V Input Power
20 - 200A with 230V Input Power
Stick Welding Output Range
20 - 65A with 120V Input Power
20 - 160A with 230V Input Power
Pulse Frequency
0.2 - 200 HZ
AC Arc Frequency
50 to 150 HZ
AC Arc Balance Control
50% to 85% EN
Weight
37-1/2 lbs.
Dimension L×W×H
19.75 in. x 9.5 in. x 16.125 in.
DESCRIPTION
The Metal Man Inverter Powered 200iDV AC/DC TIG
is a dual voltage, inverter powered AC and DC TIG,
Pulse TIG and DC Stick welder. This unit is intended to be used on a 50 amp 230V AC circuit or 120V,
20A AC Circuit, without the use of an extension cord. This machine comes complete with a TIG Torch, a
Foot Pedal, regulator/flowmeter with inert gas hose, a ground cable and clamp, and an Electrode Holder
with cable.
The 200iDV AC/DC TIG is the ideal Stick and TIG welder for every shop. The DC stick mode allows you
to stick weld when your application requires it. In the DC TIG mode you are able to TIG weld metals such
as steel and stainless steel. In the AC TIG mode, you are able to TIG weld non-ferrous metals such as
Aluminum. This unit is equipped with advanced TIG capabilities including Pulse, AC Arc Frequency
Control, AC Arc Balance Control, and Auto Balance/Frequency Control. The advanced inverter
technology that powers the 200iDV AC/DC provides for better arc control, lower power consumption, in a
lighter more portable unit.
DIGITAL METERS
Digital meters display welding amperage and voltage while welding.
FUNCTIONAL CONTROL
Use the Functional Control dial to increase and decrease the value of the function you are setting. An
indicator light will then illuminate showing which function you are setting.
WELD PARAMETER SETTING INDICATORS
When the push button below this set of indicators lights is pushed, the operator can sequence through
the different welding parameters. Use the Functional control to adjust the parameter setting indicated on
the digital meters.
REMOTE FOOT PEDAL CONTROL
The foot pedal is used to start the arc and manually adjust the amperage while TIG welding. The
cord will attached to the 5-Pin connector on the front of the unit.
STYLE 26 TIG TORCH
The TIG torch transfers welding power from the welding power source to the tungsten for the
purpose of TIG welding. It also delivers the shielding gas from the welding power source to the
welding zone. This style 26 torch uses the same common parts as other Style 26 TIG torches