Metal-Fach SEG PELLET, Technical And Operational Documentation, Page: 40 / 60

METAL-FACH Heating Technology
38
Instructions for disposal of the boiler at the end of its service life
(User)
Before scrapping the boiler, all electronic components must be disconnected from the boiler. They must be
disposed of in accordance with the European Directive 2002/96/EC concerning the disposal of electronic and
electrical equipment. For correct disposal, contact the manufacturer of the electronic components according to
the above mentioned European Directive.
The steel components of the boiler must be scrapped at designated scrap yards.
NOTE!
The used boiler, intended for scrapping, and its components must not be disposed of with
general waste.
List of spare parts
(User | Installer)
Spare parts Article
Sensors Boiler sensor,
Feeder sensor,
HUW sensor
Controls Regulator PLUM860xx
Fans Fan DM 80,
Fan RMS-120
Igniter Igniter 300W
Probe Lambda sensor kit,
Sleeve for Lambda Probe
Feeder Burner feeder screw,
Tray feeder
Instrumentation Rubber grommet,
Tank seal
Revision gasket
Gasket under the flap
Gasket under the feeder,
Door holder