General safety Instructions
• Before commissioning this device, please read the instruction manual carefully.
• Please save these instructions, the guaranty certificate, line sales receipt and, if possible, the carton with inner packaging.
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use.
• Remove the plug from the socket when you attaching accessory parts, cleaning the device or whenever a disturbance occurs.
• Switch off the device before you take out the plug. Pull always on the plug, not on the cable.
• In order to protect the children from the dangers of electrical appliances, never leave them unsupervised with the device. When you
selecting the location for your device, do it in such a way that children do not have access to the device.
• This device is not intended for use by persons with limited physical, sensory or mental capacities.
• Test the device and the cable regularly for damage. If there is damage of any kind, the device should not be used.
• Do not repair the device, cord or plug yourself, but rather consult an authorized expert or the manufacturer.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and similar.
• Use only original accessories.
• Do not use the device outdoors.
• Under no circumstances must the device be placed in water or other liquid. Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket immediately. Do not reach into the water.
• Use the device only for the intended purpose.
• Do not move the device while it’s functioning.
Instructions
1. Place the device on a flat surface.
2. Fill the water in the kettle, make sure that the water capacity is not lower than the minimum sign and not higher than the maximum
sign (use only cold water).
3. Make sure the cover is completely closed.
4. Put the water can on the base.
5. Insert the plug into the socket.
• Check if the electrical voltage you want to use is the same as the indication on the device. Details can be found on the label on the
base.
• Only connect the appliance to a grounded 230V~50/60Hz socket that has been correctly installed.
6. Place the can on the base.
7. Turn on the device, check if the indicator light is on.
8. When the water is being boiled, the device switches off automatically and the indicator light goes out.
9. Take the can from the base.
10. Ready to pour in the water.
First Use of the Machine
Before you use the device for the first time, you must boil the water and throw it away twice.
Cleaning
Always unplug the device wen you start cleaning.
Outside
1. The outside of the machine must, if necessary, get cleaned with a damp cloth.
Inside
1. Fill the kettle with water and add 2 ml of white vinegar.
2. Let the water boil.
3. Take the can of the base and empty it.
4. Clean at least tree times with water to remove the particles
ENGLISH
