Functional discription
Soft touch switch: After filling with an appropriate amount of water and properly closing the lid, press the “I” button; the heating indicator
lamp will turn ON, and water will be heated until boiling. Press the “O” button to stop the heating at any time and the heating indicator
lamp will turn OFF.
• Auto off after boiling: Product will turn off automatically after boiling, and the indicator lamp will turn off. If reheating is needed, wait for
at least 3 minutes after turning off and then press the “I” button again.
• Dry boil protection: By mistake, when the product is switched on without it containing water, the dry boil safety device will function to
provide a secondary protection.
• Thermal fuse protection: In case both the auto off and the dry boil safety device malfunction, the thermal fuse device will cut off the
electricity supply automatically in order to provide the third level of protection.
Special note
• Never immerse the whole product into water.
• Do not disassemble the product. The product should only be serviced by the appointed service agent or centre.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MW-80, applies all basic requirements and other relevant regulations listed
in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full
declaration of conformity, you can contact the adress listed on the backside of this manual
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this
product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize
its impact on the environment. For further information, please contact your local or regional authorities. Electronic
products not included in the selective sorting process are potentially dangerous for the environment and human heath
due to the presence of hazardous substances.
ENGLISH
