Form 43343350
-30-
Oct 2013
ANGLE MOUNTED HEATERS ONLY
ANGLE MOUNTED HEATERS ONLY
ANGLE MOUNTED HEATERS ONLY
ANGLE MOUNTED HEATERS ONLY
5.
If heaters are to be angle mounted, the TISS wire holder clamp must first be re-positioned as shown using
using
using
using
the bottom hole pattern
the bottom hole pattern
the bottom hole pattern
the bottom hole pattern of the clamp. Follow procedures described earlier for all other adjustments.
Angle Mounted Body Section
Re-position wire clamp using
bottom hole pattern.
End View
Step 5
Failure to re-position the wire clamp at the bottom hole pattern
will shorten the life expectancy of the TISS wire assembly.
