16
SITA Messtechnik GmbH
You can start the on-line measurement from the menu, too. Press the
menu
key and select
online measure
using the cursor keys
. Select the on-
line measurement by pressing the
ENTER
key. The device automatically
displays the menu for setting the measuring parameters and display options.
The measurement starts as soon as the software key "start" is hit.
In case an on-line measurement is already running, the set-up menu will not
be displayed and the right software keys show "stop". Pressing the left
software key "set" takes you to the set-up menu. In order to continue the
measurement you need to press the middle software key "go on".
By using the cursor keys
you can scroll the x-axis (number of
reading).
The following measuring parameters and display options can be set (saving
in case of starting a new measurement):
control:
Either the bubble "lifetime" or the bubble "frequency".
tlife / freq:
Desired bubble lifetime / bubble frequency.
average:
Number of readings to be averaged. Can be set in the range
from 1 to 32.
auto clr data:
Clear the
shown data (diagram or table)
by starting a new
me
asurement („on“ / “off“)
autosave:
Save the
shown data (diagram or table)
into the device
memory after the measurement is finished ("on" / "off"). It is
useful to set “
auto clr data
” on.
