Messtechnik Sachs Irinos IR, User Manual

Page: 58 / 214

58
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Product descriptions
output power will then fulfill the requirements of the protecion class
PELV.
Connectors for "IR-PU-50-HWS-x"
LEDs / output power
The power supply has two LEDs:
o
The green power LED signals that the 24V output power is
available.
o
The yellow load LED ("High load") is turned on, if the power
consumption of the Irinos-System exceeds about 95% of the
rated power. This means the LED is turned on if about 45 watts or
more are consumed.
Even though the power supply is designed for continuous operation
at full rated power, it is advised
not to exceed 95% of the rated
output power . Use a more powerful supply, if the load LED is active
continuously.
Most power consumers have no constant consumption .
Therefore it is advised to keep some margin.
A short flickering of the load LED while the Irinos-System is in
operation may indicate, that the power supply was overloaded for a
195