– 48 –
HOW TO OPERATE THE NEBULIZER
You can also fill a 0.9 % Sodium Chloride (Table salt) solution in the
medication chamber and then press „START/STOP” button for a
function test after reassembly and before use. If the nebulizer can
not spay out, please go to page 18 for troubleshooting.
1. Turn on the power:
Press the „START/STOP” button, and the power indicator (green)
will light constantly. And medication chamber will be lit with blue
color constantly.
Attention
If there is no medication inside the medication chamber, and the
power is turned on,
The nebulizer’s power indicator (green) will be turned on around
0.5 second, then the power indicator will be changed to orange
color immediately. after around 8 seconds,then turned-off medi
-
cation chamber light and shut-off power automatically
In the operation while medication was depleted:
the power indi
-
cator will be changed to orange color immediately and turned-off
medication chamber light, then shut off automatically the longest
nebulization time : 30 minutes.
Pure water is not applicable for use. If you fill pure water in the
medication chamber, the nebulizer can not be functioned well.
Press
Power indicator