Mesa MQC 0506, Operating Manual

Page: 13 / 20

MESA Automation GmbH
MQC 05 V 3 EM 11
9.2 Solder jumper
Solder jumper Function (closed) Remark
BR 1 Drive output to Tacho input BEMF control
BR 2 Drive output to Tacho input BEMF control
BR 3 Tacho input to GND disturbance reduction
BR 4 P-connector
R= 1,8 K Ω
BR 5 Enable logic level + 24 V set by factory
9.3 Test points connector X2
Test point X2 /PIN Remark
2 Speed controller output/ current command
3 Tacho signal
4 current m/- 10V = Imax
6 current command (Pot. P4)
10 Speed control junction
12 -15 V
14 0VE (GND)
18 Speed command
19 +15 V
20 Enable CMOS level 15 V
21 Error over voltage 0 = Error
22 Error over current 1 = OK
23 Error over temperature
24 Error input from Option subprint
Attention ! All test points refer to 0VE/GND power and logic ground direct connected
9.4 Top- Screw terminal – power input
Type PIN 1 PIN 2 PIN 3 PIN 4 Supply
MQC 0506 Housing / GND -Ucc + Ucc direct + Ucc via reverse diode DC
MQC 0510 Housing / GND -Ucc + Ucc direct + Ucc via reverse diode DC
MQC 0606 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 0610 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 1206 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 1208 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 1210 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 1510 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC
MQC 1515 Housing / GND L'3 (AC) L'2 (AC) L'1 (AC) AC