Mertz 999-848.01, Operator'S Manual

Page: 48 / 90

3-22
Pre-Start Inspection and Operation
b. Remove the protective covers (Items 4, Figure 3–33 ) from the attachment quick
connectors.
c. Wipe off the end of each of the connectors (Items 1, 2, 3, 5, Figure 3–33 ) to remove any
dirt or debris.
Figure 3–33 Auxiliary Hydraulic Quick Connects
d. Insert the attachments’ male coupling (Item 3, Figure 3–33 ) into the female bulkhead
quick connect coupling (Item 2, Figure 3–33 ) on the machine and push until the
connector locks into position.
e. Repeat the above process to connect the attachments’ female quick connect (Item 5,
Figure 3–33 ) on the other hose to the male bulkhead connector (Item 1, Figure 3–33 ) on
the machine.
f. Check the security of both connections by gently tugging on the attachment hoses to
make sure that the quick connects are seated properly.
4
2
1
4
3
5
1
2
3
5
2225