Mertz 999-848.01, Operator'S Manual

Page: 44 / 90

3-18
Pre-Start Inspection and Operation
4. When the machines mounting plates top edge is seated in the attachment mounting plate, curl
the machines mounting plate backwards slightly to allow the lower edge of the machines
mounting plate to slide into position. See
Figure 3–25 .
Figure 3–25 Attachment Installed
5. Shut the engine off.
6. Rotate the attachment lock pins (Item 1, Figure 3–25 and Item 1, Figure 3–26 ) into the
locked position, securing the attachment to the machine.
Figure 3–26 Attachment Locks in Locked Position
7. Start the engine and raise the attachment off the ground. Visually inspect the bottom edge of
the attachments mounting plate to make sure that both of the attachment lock pins are
securely holding the attachment in position.
DO NOT go underneath the attachment when it is raised.
1
2113
1 1
2022
Pins Locked
CAUTION