33
What you need to know about the installation site
¼
Danger due to electrical current!
All work on the device should only be carried out by qualified
electricians. Observe the regulations valid in the country of use,
as well as the valid EIB guidelines.
In order for the integrated room temperature control unit to work at the
optimum level, you should keep in mind the following when selecting the
right installation site:
• Mount the MF push-button with RTCU inside the room opposite
the heat source if possible.
• If possible, do not mount the MF push-button with RTCU on
external walls or in locations where there is a draught from
windows and doors.
• Mount the MF push-button with RTCU in the room in such a way
that the circulating air has unimpeded access to the device, in
other words,
not
between shelf units or behind curtains, for
example.
• External sources of heat have a negative effect on the accuracy of
the control unit. Ensure that no external sources of heat reach the
device, for example from direct sunlight or the proximity of
televisions, fireplaces, heating pipes, dimmers, socket-outlets or
other electrical consumers that emit heat.
• Mount the MF push-button with RTCU at a height of 110-160 cm.
This is where the temperature of the ambient air is best recorded,
and the display can be easily read.
• Do
not
mount the MF push-button in the flush mounting box.
What you need to know about the installation site
34
How to put the MF push-button with RTCU into operation
1
Press the programming button on the flush-mounted module.
The red programming LED lights up.
2
Load down the physical address and application from the ETS into
the Flush-mounted module.
The red programming LED goes out.
|
Note for the electrician:
Ensure that you note the settings you
have made in the ETS which are important for the user in the
configuration table (see “Presettings table”, p. 53), because not
all parameters that can be set are shown in the display of the MF
push-button with RTCU.
How to put the MF push-button with RTCU into operation
