55
How to dismantle the push-button
½
Caution:
Do not touch the surface of the push-button with
sharp-edged objects, as this may damage the surface.
|
Note:
If the protection against dismantling has been installed,
you will need a 2 mm hexagon socket screw to dismantle the
push-button.
If you are unable to remove the push-button from the FM module without
using force, the protection against dismantling has been installed. If this
is the case, use the hexagon socket screw to unscrew the middle screw
from both the upper and lower front panel.
Now you can remove the push-button from the FM module.
How to dismantle the push-button
Accessories
Article no.
Description
623090
Protection against dismantling for surface-mounted
PLANTEC devices
623091
PLANTEC labelling sheet for PLANTEC multi-function
push-button with room temperature control unit
(1 sheet for 6 devices)
615022
Merten labelling software
623299
Flush-mounted module for multifunction push-button
with room temperature control unit
56
Technical data
Power supply:
from the FM module
Connection:
PEI, 10-pole plug connector
Display elements :
6 status displays
Display
Piezo buzzer
Operating elements:
6 buttons
2 keys to navigate menu
IR receiver
Measurement range:
0 to 40 °C
Measurement accuracy:
± 1K, depends on installation site,
Offset can be parameterised
Controller type:
2-point controller
continuous PI controller
switching PI controller (PWM)
Controller mode:
heating with one controller output
Cooling with one controller output
Heating and cooling with
separate controller outputs
2-step heating with 2 controller outputs
2-step cooling with 2 controller outputs
Type of protection:
IP 20
Technical data