41
Learning the individual blind travel time
The blind time switch is preset so that
the blind takes 2 min. to be lowered
(see „Individual blind travel time“,
p. 36). If the blind reaches the lower
limit position before the 2 min. have
expired, it is automatically stopped by
the limit position switch in the motor.
You can reduce this travel time, or
extend it to a maximum of 12 min.
1
Press and hold the
[Set]
button until
prog
appears in the display.
The device is now in set mode. The
"Set date and time" lights flash on the
display.
2
Press the
[
▲
]
or
[
▼
]
button until the
symbol for blind travel time
appears.
3
To confirm, press
[Set]
.
The blind now travels up to its limit
position. Wait until the display
(
▲
)
disappears.
To start the learning process:
4
Press
[
▼
]
.
The blind starts to be lowered. The
travel time is shown in the display by a
seconds counter 0000.
When the blind has reached the
desired position:
5
Stop the blind by pressing
[
▲
]
or
[
▼
]
.
The learned travel time is saved.
appears in the display, to show that the
learned travel time is active (see
„Switching summer/winter time/
learned travel time“, p. 40).
Learning the individual
blind travel time
