Merloni
Elettrodomestici
WASHING MACHINE AND WASHER-DRIER
Technical Fitting Manual
GB
99-11-03/01
13-14
Language
Issue/Edition
Page
It is important that the pipe be positioned at a height of above 60 cm;
otherwise the pipe must be fastened to the hook provided at the top of the
back section, as illustrated in Fig. 16.
Fig. 16
7
CONNECTION TO THE MAINS
Insert the plug into a power socket fitted with a proper earthing connection,
after first checking that the voltage and frequency of the mains power supply
correspond to the values indicated on the rating plate on the machine's stainless
steel door fairing, and that the system to which it is being connected is sized for
the maximum load indicated on the plate. If the socket to which the machine is
connected does not correspond to the plug, always replace it with a suitable
plug, rather than using adapters or extensions, as these might result in
overheating and therefore create a fire hazard.
CAUTIONS AND ADVICE
1. Do not use drainage pipes with extensions over three metres in length, as
these might reduce the efficiency of the appliance. If required, the spare
parts code is 26297 and the pipe is 3 metres long. Should it be necessary to
use a water supply pipe longer than the one provided with the machine
(with waterstop), the spare parts code is 057866 and the pipe is 3.5 m long.
2. To ensure that the machine operates correctly it must be properly levelled,
so that its inclination does not exceed 2â on the top. To do this, turn the
adjusting feet (Chapter 4).
