Merloni
Elettrodomestici
WASHING MACHINE AND WASHER-DRIER
Technical Fitting Manual
GB
99-11-03/01
11-14
Language
Issue/Edition
Page
6
PLUMBING IN
6.1
Connecting to the water supply
Ensure that the water pressure is within the minimum and maximum levels
indicated in the rating plate, located at the rear of the washing
machine/washer-drier.
Connect the supply pipe to a cold water tap with a _” threaded mouth, taking
care to fasten it tightly to the tap and inserting the filter element
A
carefully
(Fig. 13).
If the water supply pipe is new, or has not been used for some time, run the
water through it before connecting, until the water runs clear and contains no
impurities.
If this precaution is not taken, the water inlet may become clogged, damaging
the machine.
Connect the other end of the pipe to the machine at the water connector
provided, top right hand side (Fig. 14).
Fig. 13
Fig. 14
A
