9
Ordinary maintenance and cleaning
Before each operation, disconnect the oven from the
electricity. To assure the long life of the oven, it must be
thoroughly cleaned frequently, keeping in mind that:
l
the enamelled parts are washed with warm water without
using any abrasive powders or corrosive substance which
could ruin them;
l
the inside of the oven should be cleaned fairly often while
it is still warm using warm water and detergent, followed
by careful rinsing and drying;
l
the electric plates are cleaned with a damp cloth and
they should be lubricated with a little mineral oil while
they are still warm;
l
Stainless steel may become marked if it comes into
contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time. After
cleaning, it is advisable to rinse thoroughly and dry. It is
also recommended to dry any water drops.
l
in models with glass covers, the covers are cleaned with
hot water, and use of rough cloths or abrasives is to be
avoided.
N.B: avoid closing the cover while the electric plates are
still warm.
Replacing the oven lamp
l
Unplug the oven from the mains;
l
Remove the glass cover of the lamp-holder;
l
Remove the lamp and replace with a lamp resistant to
high temperatures (300°C) with the following
characteristics:
- Voltage 230V
- Wattage 25W
- Type E14
l
Replace the glass cover and connect the oven to the
mains.
