6
Inner glass oven door (I)
The oven is provided of an inner glass that can be removed
unscrewing the two screws (L) that fix it to the door. This
glass must be replaced after cleaning and always be
in position when cooking.
Cooling fan
A fan has been incorporated to blow cool air through vents
in the front of the oven during cooking. If the oven is
operated for a long period, the air blowing through the
vents may become warm.
Oven door
You can buy a special kit to reduce door temperature when
the oven is on and save energy. If there are little children
in the house, this kit is a must. The kit code number is
039888 or 039104 (for traditional models with plate-metal
door) and it may be purchased for installation from an
authorised dealer or a Technical Assistance Service centre
indicated in the list included with the appliance documents.
Oven handle
Important: the cooking steam leaves the oven from the
slots at the extreme right of the handle. Do not touch this
part of the handle. For ovens with tubular handles, there
is a special protective device which is fitted during cooking
to keep steam away from the front of the cooker.
1
2
Important
Do not place casseroles on the bottom tray of the oven.
These not only prevent uniform baking but the heating
element under the bottom tray will burn the food
underneath.In addition the casseroles prevent propoer air
circulation in ventilated ovens. Moreover, this bottom tray
is convex to ensure major resistance to deformations and
is therefore not a level surface.
Electronic Cooking Programmer
The programmer makes it possible to preset the oven and
the grill in terms of:
•
delay start with a preset length of time for cooking;
•
immediate start with a preset length of time for cooking;
•
timer.
Button functions:
: Timer with hour and minutes;
: Length of cooking time;
: End cooking time;
: Manual change;
: Change time (backwards);
: Change time (forwards).
How to Reset the Digital Clock
After the appliance has been connected to the power source
or following a power outage, the clock display will begin to
blink and read: 0:00
•
Press the
and
buttons at the same time. Then
use (within 4 seconds) the
and
buttons to set
the exact time.
Use the
button to move the time forwards.
Use the
button to move the time backwards.
The time can also be changed in the following two ways:
1. Repeat all of the foregoing steps.
2. Press the
button, and then use the
and
buttons to reset the time.
Manual Operation Mode for the Oven
After the time has been set, the programmer is automati-
cally set to manual mode.
Note: Press the
button to return the oven to manual
mode after every "Automatic" cooking session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set. Let us
suppose that the display shows 10:00.
1. Turn the oven control knob to the cooking setting and
temperature desired (example: convection oven at
200°C).
2. Press the
and the use (within 4 seconds) the
and
buttons to set the length of the cooking time. Let
us suppose that 30 minutes was set for the length of the
cooking time. In this case, the display will show:
Release the button, and within 4 seconds, the current time
will reappear with the
symbol and "auto."
3. Press the
button, and then use the
and
buttons to set the end cooking time. Let us suppose that
it is 13:00
