Q155 Service Manual
- 4-1 -
Figure 4-4 Remove solenoid valve
4.3.2.
Solenoid Coil Replacement
i.
Set the ON/OFF switch to the OFF position, and unplug the power cord.
ii.
Remove the cabinet. (See section 4.2.1)
iii.
Disconnect the terminal of the damaged solenoid coils. (See Figure 3-8)
iv.
Loose the fixing nuts above solenoid coils and remove the coils.(See Figure
4-5)
v.
Install new Coils.
vi.
Tighten the coils
’
fixing nuts and connect the terminals of coils.
Figure 4-5 Remove solenoid coil
Six screws of the
solenoid valve
Fixing nuts