COPYRIGHT © 1999 MERIT INDUSTRIES, INC.
Refer to the list below if you are experiencing a problem with your Megatouch SLIM MAXX Game…
P
ROBLEM
C
ORRECTIVE
A
CTION
C
OMMENT
Game not recording credits
from coins,
Bill acceptor not working.
•
Check that the coinbox assembly is
correctly installed.
•
Check that the wiring harness on the
coinbox/bill acceptor is intact and not
damaged.
•
Check that the bill acceptor is powered.
•
Check the actuator wire on the coin
mech micro switch.
•
Coinbox assembly must be fully
inserted and locked into place.
•
Inspect the wiring harness on the
coinbox/bill acceptor for damage.
Make sure that it is fully
connected.
•
Bill acceptor (only) requires a
power connection from the power
supply. This power connection is
the same plug that is used to
power the monitor. There is a
second connector (two
conductors) behind the
coinbox/bill acceptor connector.
Both connections must be
complete for proper operation.
•
The actuator wire is the thin wire
at the end of the coin chute.
Merit Industries, Inc.
Troubleshooting Guide for Megatouch™ SLIM MAXX Games
PM0240-01 MEGATOUCH™ SLIM MAXX OWNER’S MANUAL 14