C o n f i g u r i n g
t h e D V D p l a y e r
Configuring the sources
If you are using the DVD player as the controller or video switcher
in your Meridian system, you can use the
Source setup
option on
the
Setup
menu to configure each of the sources.
• Highlight
Source setup…
in the
Setup
menu, and press
Enter
.
The
Source setup
menu will be displayed:
To configure a source
• Press the source key on the remote corresponding to the source
you want to configure.
The
Source configuration
menu shows the values of each option
defined for that source.
To change an option
• Highlight the corresponding option in the
Source
configuration
menu and press
Enter
, select the value you want
to use, and press
Enter
to select it.
The following table explains the function of each of the options:
Option
Values
Description
Enabled
Yes, No
Whether the source appears on the list of sources.
Audio input
A1-A3, D1-D2, O1-O2, Disc, Tuner
The audio input used for the source; analogue, digital, optical, and
internal; see below.
Sensitivity
2.5V, 2.0V, 1.0V, 0.7V
Allows you to set the sensitivity of the analogue inputs.
Video input
V1-V2, S1-S3, Y1, Bypass, Disc
Video input used for the source.
Video lock
Normal, Poor
Improves locking for poor video sources
Trigger
High, Low
Trigger output for the source.
HDMI switch
1 to 4
Available if
HDMI switch
is set to
On
in the
HDMI setup
menu.
Allows the G92 to control the input on the HDMAX 421.
Comms cat/add
-C, 1C-9C, NC/1A-8A
Allows you to set the Comms category and address.
