Customising using Config
32
D6000 User Guide
r.
indicates a right master.
3. Release the 0 key
Root menu options
The root menu controls the overall operation of the D6000s, with options
for master/slave and left/right.
You get to the root menu by
1. Selecting Config, as above
or, at any stage in the Config programming process,
1. Pressing Clear or Off
Choosing left or right
To change a left speaker into a right speaker, or vice versa:
1. Press
n
n
or
s
s
on the remote control
Choosing master or slave
To change a master to a slave, or back again:
1. Press Play on the remote control
r.
S.
This display indicates a right slave.
System menu
To get into the system menu:
1. Press the menu
e
e
key
Preamplifier options
The first digit in the system menu identifies the dominant preamplifier in
the system.
The display looks like this:
Cd
??
The first letters tell you which options are available to you, as follows:
•
500 tells you that this system operates in Meridian 500-Series mode.
All controllable Meridian products must be 500 compatible. Also use
this if the D6000 is the only controllable preamplifier connected (i.e. the
source keys on the MSR will only select between the four inputs of the
D6000).
•
Pr. means that the preamplifier for this system will be a Meridian 201,
601, 603 or compatible, and that source keys on the MSR will
automatically switch the inputs on the preamplifier regardless of other
selections. Implies and engages 200 mode.
•
Cd means that the preamplifier for this system will be a Meridian
CD/Pre (e.g. a 207 or 208). The first four input keys (CD, Radio, LP
and Tape1) on the MSR will automatically switch the inputs on the
CD/Pre regardless of other selections. Input keys Tape2 and Video will
select CD on the CD/Pre. Implies 200 mode.
To move through these options:
1. Press
n
n
or
s
s
(menu keys)
