Meridian C61R, Installation Manual

Page: 54 / 116

M e r i d i a n
C o n f i g u r a t i o n
P r o g r a m
Products: Adding speakers
The next step is to add the speakers in your system.
• Click the insert a speaker link in the Information Bar.
The Insert Speaker dialogue box allows you to select which type
of speaker you want to add, and the positions in which to add it.
• Select
DSP8000
from the
Type
drop-down list.
The
Location
will automatically be set to
Front left/right
:
• Click the OK button to add the speakers.
The speakers will be added to the appropriate points in the layout,
and the connections will automatically be made between the
speakers and the controller:
• Click the insert a speaker link again and select DSP5500HC
from the Type drop-down list to add a centre speaker:
The program will offer to add a 511 patch box to the layout to
connect the Comms cables for the speakers:
• Click the Yes button to confirm.
• Click the
insert a speaker
link again and click
Analogue
(passive)
on the
Type
drop-down list to add small analogue
rear speakers:
• Click the
OK
button to add the speakers.
The Meridian Configuration Program will automatically prompt you
to add an amplifier to the layout to drive the passive speakers: