Meridian Bulk Seed Tender Seed Express 225RST, Operator'S Manual

Page: 44 / 68

44
6. Ensure all personnel are clear of the unit.
Start the engine and test the actuator by
pressing actuator switch (12) to ensure the
engine speed increases and decreases as
designed.
11.5 UNPLUGGING AUGER DELIVERY
TUBE
IMPORTANT
Do not operate the auger when it is plugged with
excess seed or is hindered from moving by a foreign
object. Continued operation can cause damage.
If the auger becomes plugged, follow this
procedure:
1. Stop the engine and remove the ignition key.
Place a lock-out tag on the control box to
prevent accidental starting of the conveyor.
2. Open the lower access door at the bottom of
the auger and remove any excess seed or
obstruction.
3. Close and secure the lower access door.
11.6 AUGER DRIVE BELT
The auger is driven by a belt from the motor. The
belt is tightened by moving the engine base with
the adjusting bolt.
11.6.1 Drive Belt Tension
Release the base when replacing the belt. Always
install and secure the guard before resuming work.
1. Loosen the four engine mounting bolts.
2. Loosen the engine base stabilizing bolt.
3. Loosen the engine base adjusting bolt jam nut
and move the engine base to set the desired
belt tension.