Meridian Bulk Seed Tender Seed Express 225RST, Operator'S Manual

Page: 31 / 68

31
6. Make sure the lock mechanism on the slide
gate handle is in the lock position.
7. Move the unit to the location of the planting
equipment following all safe towing practices.
8.3.2 Unloading Seed Tender
The seed tender will only unload from the left side.
1. Position the seed tender near the planter.
2. Before unloading, shut off the engine of the
tow vehicle, set the parking brake, and remove
the ignition key, and wait for all moving parts
to stop before leaving the cab.
3. Check the surrounding area for overhead
power lines that would contact the auger tube
in its raised position.
Contact with electricity
can result in serious personal injury or
death.
WARNING
ELECTROCUTION HAZARD
Avoid contact with overhead
power lines or electrically
powered objects.
1. Be aware of your surroundings
when raising or lowering any
part of equipment.
2. Maintain at least 20 feet between equipment
and any electrical hazard.
3. Contact with electricity can result in serious
personal injury or death.
4. Unlatch the rubber tie-down strap from the
delivery spout.
5. Lower the delivery spout to the ground.
6. Make sure the auger cable is threaded into
the hole in the end of the auger. Damage to
the auger can occur if the cable is not properly
inserted.