89
e
f
g
5. If your rear shock has steel coils, you should reg-
ularly have the coils cleaned and lubricated with
a non-corrosive resin-free grease
(e)
. Some rear
shock manufacturers supply special greases for
fork maintenance. Strictly observe the recommen-
dations of the manufacturers. These are routines for
the rear shock service center.
6. Rear shocks with air spring must be checked regu-
larly for air pressure
(f)
, since the air escapes over
time.
7. Check the proper fit of all rear frame bolts according
to the marking on the rear stay by using a torque
wrench at regular intervals. Also check the bearing
positions of the rear frame for lateral play or the rear
shock bearing for vertical play.
For checking lift your MERIDA bike by the saddle
(g)
and try to move the rear wheel from side to side. If
necessary, ask a helper to hold the frame tight in the
front area.
The check the rear shock for play place the rear
wheel gently on the ground and lift it again a little.
Check for any rattling. If there is any play, ask your
MERIDA dealer to eliminate it without delay.
G
Suspension elements are of sophisticated de-
sign. The maintenance routines and above all
the disassembly of the suspension elements
are jobs best left to your MERIDA dealer or the rear
shock manufacturer’s service center.
A
Rear shocks are constantly being sprayed
with water and dirt from the rear wheel. Clean
them with plenty of water after every ride.
I
Be sure to have your rear shock checked by a
service center of the rear shock manufacturer
once a year at least.
i
More information on adjusting and mainte-
nance is available on the internet at
www.srsuntour-cycling.com
www.ridefox.com
www.rockshox.com
www.manitoumtb.com
www.rst.com.tw
www.xfusionshox.com
www.dtswiss.com
www.magura.com
Summary of Contents for BIG.NINE E-LITE 600
Page 128: ...MERIDA com...
