Mercury VesselView 7, Manual

Page: 49 / 61

Section 5 - Screen Navigation
90-8M0074777
eng
MAY 2013 Page 45
3. The set‑point adjustment selection field will be the default location at cruise start‑up. After making adjustments to the
desired settings, use the rotary knob to move the cursor to the enable/disable selection in the footer area of the contextual
data area.
a. Use the rotary knob to move between the set‑point selection and the footer.
b. When the selection box is outside the footer navigation area (set‑point field), the operator only needs to use the rotary
knob to make RPM or speed adjustments. There is no need to press the knob to engage the new setting.
4. Minimize is a feature that allows the operator to use the cruise feature while displaying additional data in the contextual
data area.
IMPORTANT: Set‑points cannot be adjusted when cruise is minimized.
a. Scroller bar icon selection is limited. Items that are not accessible will be grayed out when cruise is active.
b. If autopilot is active, and cruise is minimized, the system tray will display CRUISE in the system tray.
• Cruise data will be displayed over autopilot settings if the user selects the system tray.
• If an autopilot popup warning occurs or the operator uses the autopilot CAN track pad, autopilot contextual data
will automatically fill the contextual data area. The operator will have to minimize to hide the popup data.
5. After minimize is activated, the system tray will display CRUISE.
6. When exit is selected while displaying cruise element, the cruise feature will be disabled. The cruise icon will be displayed
next to the system tray until another icon is selected from the scroller bar.
Troll Control Mode
The troll feature allows the operator to select a set‑point and adjust the value so that the vessel maintains a specific speed or
engine RPM.
•
Troll is RPM based.
•
Open the scroller bar and highlight the troll icon. Press the rotary knob to active troll control. Refer to
Scroller Bar Icons
to
identify the troll icon.
NOTE: Troll Control can be disabled by placing the remote control levers in neutral.
Troll Control Contextual Data Area
Persistent Data Change
Troll will modify the persistent data area of the screen by incorporating a RPM indicator within the RPM sweep, similar to Smart
Tow and ECO Mode targets.
•
When troll control mode is activated, elements of the persistent data will be modified to communicate:
• RPM set‑point.
• RPM sweep color will change to orange when active to indicate that the engine is computer controlled.
a - Not active
b - Active
Troll – Contextual Data Area
Troll will modify the contextual data area of the screen when active.
•
Elements within the contextual data area will change to allow the user to set‑up:
a. RPM set‑point.
a
b
52278