Mercury VesselView 7, Manual

Page: 18 / 61

Section 2 - System Startup
Page 14 90-8M0074777
eng
MAY 2013
Units of Measurement
Use the rotary knob to highlight and accept the type of measurement you prefer to use: U.S. Standard or metric.
NOTE: You can change the unit of measurement on specific sensors. Go to the Settings menu to change the sensor unit of
measurement.
Display Setup
The DISPLAY SETUP screen enables you to choose where the data for each engine is displayed on VesselView. Typically, the
engines are displayed left to right, in the same order as their physical locations port to starboard. Some helm configurations
may require different display settings. If you choose to display only one engine in a multi‑engine application, VesselView
displays the collective data such as total fuel flow and range for all engines, but displays engine specific data for only the
engine selected for that display.
1. Use the rotary knob to highlight the engine location. Press the knob to turn it off or on. VesselView can display information
for up to four engines.
DISPLAY SETUP
Select which engines to show on this
display.
Port
Previous
Next
50722
Stbd
2. Use the rotary knob to highlight which engine to be displayed. Press the knob to turn it off or on. The following is a
description of what may be available, depending on the number of engines:
• NONE
• STBD
• PORT
• STBDCNTR (triples and quads)
• PORTCNTR (quads only)
3. Use the rotary knob to highlight Next to continue to DEVICE SETUP.
Device Setup
The unique VesselView ID differentiates each VesselView unit from all other installed SmartCraft devices. The DEVICE SETUP
screen enables you to assign this unique identifier to each VesselView unit and to designate whether the VesselView is
installed at the primary or secondary helm.
IMPORTANT: Do not choose the same unique VesselView ID for multiple VesselView installations.
1. If there is only one VesselView unit installed on the vessel, proceed to step 5: otherwise, press the enter button to access
the UNIQUE VESSELVIEW ID option.