background image

WARRANTY INFORMATION

2

Mercury Marine

Attn: Warranty Registration Department

W6250 W. Pioneer Road

P.O. Box 1939

Fond du Lac, WI 54936-1939

920-929-5054

Fax 920-929-5893

NOTE: Registration lists must be maintained by Mercury Marine

and  any  dealer  on  marine  products  sold  in  the  United  States,

should a safety recall notification under the Federal Safety Act be

required.

2. To  be  eligible  for  warranty  coverage,  the  product  must  be

registered with Mercury Marine. At the time of sale, the dealer

should  complete  the  warranty  registration  and  immediately

submit  it  to  Mercury  Marine  via  MercNET,  E‑mail,  or  mail.

Upon receipt of this warranty registration, Mercury Marine will

record the registration.

3. Upon  processing  the  warranty  registration,  Mercury  Marine

will send registration verification by mail to the purchaser of

the  product.  If  this  registration  verification  is  not  received

within 30 days, please contact your selling dealer immediately.

Warranty  coverage  is  not  effective  until  your  product  is

registered with Mercury Marine.

Mercury Inflatable Boat Limited Warranty United

States and Canada

Outside  United  States  and  Canada  ‑  Check  with  your  local

distributor.
WHAT IS COVERED

Mercury Marine Inflatable Boats are warranted to be free of defects

in material and workmanship during the period described following.

Summary of Contents for Roll Up 899197001






































Reviews: