background image

WARRANTY INFORMATION

3

DURATION OF COVERAGE

The  fiberglass  hull,  air  deck®  floor,  all  hull  attachments  and

accessories, but not limited to, floorboards. seats, rope holders,

oar locks, oars, rope, air pump, lifting handles, d‑rings, oar holders,

valves, seat webbings, and transom integrity are covered by this

Limited Warranty for one (1) year from the date the product is first

sold,  or  the  date  on  which  the  product  is  first  put  into  service,

whichever  occurs  first.  All  the  air  holding  fabrics  are  warranted

against defects in material or workmanship that cause blistering

and delaminating for five (5) years for Duratex (PVC) fabrics and

ten  (10)  years  for  Hypalon  fabrics.  The  repair,  replacement  of

parts, or the performance of service under this warranty does not

extend the life of this warranty beyond its original expiration date.

Unexpired warranty coverage can be transferred to a subsequent

purchaser upon proper registration of the product.

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN

WARRANTY COVERAGE

Warranty  coverage  is  available  only  to  retail  customers  that

purchase from a Dealer authorized by Mercury Marine to distribute

the product in the country in which the sale occurred. Warranty

coverage  becomes  available  upon  proper  registration  of  the

product by the authorized dealer. Routine maintenance outlined in

the Operation and Maintenance Manual must be performed in a

timely manner in order to maintain warranty coverage. If the retail

customer performs this maintenance, Mercury Marine reserves the

right  to  make  future  warranty  coverage  contingent  on  proof  of

proper maintenance.

WHAT MERCURY WILL DO

Mercury’s sole exclusive obligation under this warranty is limited

to, at our option, repairing a defective part, replacing such part or

parts with new or Mercury Marine certified remanufactured parts,

or refunding the purchase price of the Mercury product. Mercury’s

sole and exclusive obligation under the limited warranty against

fabric delimitation is the replacement of the boat skin (only the boat

skin). Mercury reserves the right to improve or modify products

previously manufactured.

Summary of Contents for Roll Up 899197001






































Reviews: