Mercury MTTR01, User Manual

Page: 3 / 20

MTTR01 User Manual
 Remove the connection between the testing leads and the circuit being
tested, and turn the meter power off before opening the meter case.
 The internal circuit of the meter shall not be altered at will to avoid
damage of the meter and any accident.

A soft cloth and mild detergent should be used to clean the surface of
the tester on a regular basis. No abrasive and solvent should be used
to prevent the surface of the tester from corrosion or damage.

The tester is suitable for indoor use only.
 Turn the tester power off when it is not in use and take out the battery
when not using for a long time. Check the battery regularly; replace the
battery immediately if any signs of leaking appear. Battery acid will
damage the tester.
General Specifications
Max display: LCD (6000 count) 64 x 43mm
Polarity: Automatic, indicated minus, assumed plus
Measure method: double integral A/D switch implement
Sampling speed: 2.5 times per second
Over-load indication: “OL” is displayed
Operating temperature: 0ºC to 40ºC, at <75%RH
Storage temperature: -30ºC to 60ºC, at <85%RH
Power: 9Vdc (1 x PP3 battery supplied)
Low battery indication: “ ”
Display resolution: 6000 counts
Resistance: 600Ω to 60MΩ
Capacitance: 40nF - 4000µF
Frequency: 9.99Hz - 9.99MHz
Test temperature: -20°C - 1000°C
Duty cycle: 5% to 95%
Dimensions: 188 x 81 x 48mm
Weight: 420g (including battery)