Mercury MTTR01, User Manual

Page: 19 / 20

MTTR01 User Manual
1) Battery and fuse replacement should only be carried out after the test
leads have been disconnected and the power is off.
2) Loosen screws with a suitable screwdriver and remove case from the
bottom.
3) The meter is powered by a single 9V PP3 battery. Snap the battery
connector leads to the terminals of a new battery and reinsert the
battery into the case top. Tidy the battery leads so that they will not be
pinched by the battery cover.
4) The meter is protected by fuses:
 mA: F0.5A/600V Fast blow. Breaking capacity is 20KA.
dimensions are 38 x 10mmØ
 10A: F10A/600V Fast blow. Breaking capacity is 20KA.
dimensions are 38 x 10mmØ
Replace the cover and reinstall the three screws. Never operate the meter
unless the case bottom is fully closed.
ACCESSORIES
 Instruction manual
 Set of test leads (red and black)
 9V PP3 battery
 USB lead
 Mini CD (software)
 K type thermocouple
 Capacitor/Transistor testing adaptor