Mercury MTTR01, User Manual

Page: 16 / 20

MTTR01 User Manual
The display range of frequency measurement is auto from 0-10MHz, the
scope of the input signal should 0.5 – 3Vpp.
The display range of duty cycle is 0-100%, the scope of the input signal
should be 4-10Vpp.
When measuring AC voltage or AC current, frequency and duty cycle can
be toggled by press “Hz/Duty” button. To exit back to AC voltage/AC
current measurement, press and hold the “Hz/Duty” button for 2 seconds.
RELATIVE MODE
When measuring voltage, capacitance, temperature or current, relative
mode is available for measuring changes to a reference value you set.
1. Press “Rel/USB” button while measuring the reference value, the unit
will memorize the reference value and enter relative mode with “ ”
displayed on the screen and reading display with 0.
2. Now any measurement taking the unit will only display the difference
between the reference value and the current reading value.
3. To exit relative more, press “Rel/USB” again
USB MODE
In USB mode this tester allows the live reading to feed to a computer and
display on screen via the supplied software. To enter USB mode, press and
hold “Rel/USB” for 2 seconds. To exit USB mode, press and hold “Rel/USB”
again for 2 seconds.
Software is supplied or can be downloaded from the URL below:
http://cdn.avslgroup.com/downloads/600104_MTTR01-software.zip
Minimum system requirement - Windows 2000, XP, Vista & 7
Pentium 233MHz processor or faster (300MHz recommended), 512MB of
RAM, 1GB of available space on the hard disk, CD-ROM or DVD-ROM drive,
USB 1.0/2.0 port, monitor with Super VGA (800 x 600) or higher resolution.