3: BIOS Setup Utility
Video Power Down
Mode
This item determines a required power-saving
mode to power down the graphics sub-system.
You can force the graphics to power down in
Stand By or Suspend modes, or disable the
powerdown.
Hard Disk Power
Down Mode
This item determines a required power-saving
mode to power down the hard disk drive(s). You
can force the hard disk to power down in Stand By
or Suspend modes, or disable the powerdown.
Standby Time Out
(Minute)
This item sets up the timeout (minutes) for the
Standby mode. The computer will be a power-
saving Standby mode if the system has been
inactive after the setup time.
Suspend Time Out
(Minute)
This item sets up the timeout (minutes) for the
Suspend mode. The computer will be a power-
saving Suspend mode if the system has been
inactive after the setup time
ResumeOn
PME#/LAN/Ring
The system can be turned off by a software
command. If you enable this item, the system can
automatically resume if there is traffic on the
onboard network adapter or PCI LAN/Modem
card. You must use an ATX power supply in order
to perform this feature.
PowerOn by KBC
Wake up key
Wake up
password
If you enable this item, system can automatically
resume by pressing hot keys on the keyboard or
typing in the password. You must enable the
Keyboard Power On jumper and use an ATX
power supply in order to use this feature.
PowerOn by RTC
Alarm / Date / Hour
/ Minute / Second
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume at a fixed time based on the
system’s RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.
29
Summary of Contents for KOB KM266 FDSMx
Page 4: ...Mainboard User s Manual IV...
Page 26: ...Mainboard User s Manual 22...
