Mainboard User’s Manual
Jumper JP5: Keyboard Power On Selector
If you enable the Keyboard Power On feature, you can use hot
keys on your keyboard as a power on/off switch for the system.
Note:
The system must provide 1A on the +5VSB (+5V Standby)
signal before using the Keyboard Power On function.
Function Jumper
Setting
Disable Keyboard Power On
Short Pins 1-2
Enable Keyboard Power On
Short Pins 2-3
Install the Mainboard
Install the mainboard in a system chassis (case). The board is an
ATX size mainboard with a twin-tier of I/O ports. You can install
this mainboard in an ATX case. Ensure that your case has an I/O
cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
1
SYSFAN1
AUDIO1
PANEL1
1
ATX1
Connect the power connector from the power supply to the
ATX1
connector on the mainboard.
1
SPK1
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
SYSFAN1
fan power connector
on the mainboard.
Connect the cable from the PC speaker to the
SPK1
header on the
mainboard.
Pin Signal
Pin Signal
1
+5V
2 NC
3 GND
4 SPKR
14
Summary of Contents for KOB KM266 FDSMx
Page 4: ...Mainboard User s Manual IV...
Page 26: ...Mainboard User s Manual 22...
