Section 6 - Predelivery (PDI) and Customer Delivery (CDI) Checklists
Page 48
90-8M0093150
eng
MAY 2014
Predelivery Inspection (PDI)
IMPORTANT: This checklist is for packages equipped with joystick piloting. For engine packages not equipped with Joystick
Piloting for Ouboard, use the outboard PDI checklist located on the MercNet website.
Perform these tasks before the Customer Delivery Inspection (CDI).
N/A Check/
Adjust Check Before Running:
⃞
⃞
Service bulletin updates or repairs completed
⃞
Drain plug installed and drain valves closed
⃞
Engine mounts tight
⃞
Engine alignment
⃞
Battery of proper rating, fully charged, secured, with protective covers in place
⃞
All electrical connections tight
⃞
All fuel connections tight
⃞
Correct propeller selected, installed, and tightened to specifications
⃞
Throttle, shift and steering system fasteners tightened to specifications
⃞
Steering operation throughout range
⃞
Crankcase oil level
⃞
Power trim oil level
⃞
Power steering fluid level
⃞
⃞
SmartCraft gauges calibrated
⃞
Warning system operation
⃞
Trim limit operation if applicable
⃞
Inspect the port hydraulic steering fluid reservoir level
N/A Check/
Adjust Helm:
⃞
Inspect the joystick (full movement in all directions)
⃞
Inspect the steering wheel and tilt mechanism.
⃞
⃞
Inspect the VesselView (powers up with either key switch), if equipped
⃞
⃞
Inspect the all trackpads (functional)
