Mercury 2007 Montego Owner'S Manual Download Page 39

Page: 39 / 280

Liquid Crystal Display (LCD) flip-down screen

The LCD screen rotates down and can be adjusted to your desired
viewing angle. When not in use, rotate the screen up into the storage
housing.

Note:

Ensure that the screen is securely latched into the housing when

stored.

1. 7.0” (diagonal) active matrix liquid crystal display (LCD).

2. Display housing.

3. Dimmer switch. Press +/- to increase/decrease the brightness of the
display.

Playback and format

•

The DVD player of your Family Entertainment DVD System can only
be used in the “playback” mode. (The DVD player does not offer a
record feature.)

•

The system plays standard CDs, DVDs and also plays most CD R/W,
DVD R/W, VCD and MP3 media.

2007 Montego

(mgo)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for 2007 Montego

























































































































































































































































































Search results

Summary of Contents for 2007 Montego

Reviews:

Related manuals for 2007 Montego

Brands by name

Popular brands

Mercury 2007 Montego, Owner'S Manual

Search results

Summary of Contents for 2007 Montego

Reviews:

Related manuals for 2007 Montego

Brands by name

Popular brands