Mercury 2007 Montego, Owner'S Manual

Page: 70 / 280

Note:
•
Vehicle speed may vary momentarily when driving up and down a
steep hill.
•
If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
•
If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control:
•
Depress the brake pedal or press CNCL (Cancel).
Disengaging the speed control will not erase previous set speed.
Resuming a set speed
Press the RES control and release
it. This will automatically return the
vehicle to the previously set speed.
The RES control will not work if the
vehicle speed is not faster than 30
mph (48 km/h).
Increasing speed while using speed control
There are two ways to set a higher
speed:
•
Press and hold the SET + control
until you get to the desired
speed, then release the control.
You can also use the SET +
control to operate the Tap-Up
function. Press and release this
control to increase the vehicle set
speed in small amounts by 1 mph
(1.6 km/h).
•
Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.
SET
SET
RSM CNCL
ON OFF
SET
SET
RSM CNCL
ON OFF
2007 Montego (mgo)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
70