manualshive.com logo in svg

Mercury 2007 Milan, Owner'S Manual

The Mercury 2007 Milan Owner's Manual is essential for getting to know your vehicle better. It provides comprehensive information on maintenance, operation, and troubleshooting, ensuring a smooth and safe driving experience. Download this manual for free at manualshive.com to unlock its full potential.

Share
Download
background image

passenger heated seat.

Note:

The passenger heated seat will turn off

automatically after 15 minutes of use.

5.

:

Distributes air through the windshield defroster ducts, demister

outlets, and the front and rear seat floor ducts. The system will
automatically provide outside air to reduce window fogging.

6.

:

Distributes air through the floor and rear seat floor ducts.

7.

:

Distributes air through the instrument panel and center console

registers (if equipped) and the front and rear seat floor ducts.

8.

:

Distributes air through the instrument panel and center console

registers (if equipped).

9.

Driver heated seat control:

Press to heat the driver seat. Press

once to activate high heat (two indicator lights). Press again to activate
low heat (one indicator light). Press again to deactivate the driver
heated seat.

Note:

The driver heated seat will turn off automatically

after 15 minutes of use.

10.

Manual override controls:

Allows you to manually select where

airflow is directed. To return to full automatic control, press AUTO.

11.

Recirculation control:

Press to activate/deactivate air

recirculation in cabin. Recirculated air may reduce the amount of time to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculation can be
engaged manually in any other airflow selection except

(defrost).

Recirculation may turn off automatically in all airflow selections except
MAX A/C.

12.

A/C control:

Press to activate/deactivate air conditioning. Use with

recirculated air to improve cooling performance and efficiency. Engages
automatically in AUTO,

(defrost) and

(floor/defrost).

13.

OFF:

Outside air is shut out and the fan will not operate.

14.

Temperature control:

Press to increase/decrease the temperature

in the vehicle cabin.

15.

AUTO:

To engage automatic temperature control, press AUTO and

select the desired temperature using the temperature control. The
system will automatically determine fan speed, airflow location, A/C on
or off, and outside or recirculated air, to heat or cool the vehicle to reach
the desired temperature.

16.

EXT:

Press to display outside temperature. Press again to display

cabin temperature settings.

2007 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Climate Controls

44

Summary of Contents for 2007 Milan


























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Milan

GMC HUMMER EV 2022 Manual preview
HUMMER EV 2022
Brand: GMC Pages: 140
Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
true-i HMBS-200 User Manual preview
HMBS-200
Brand: true-i Pages: 11
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Volvo 2009 S40 Owner'S Manual preview
2009 S40
Brand: Volvo Pages: 286
Velleman CAMSET28 User Manual preview
CAMSET28
Brand: Velleman Pages: 17
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111
Jeep RENEGADE 2023 Quick Manual preview
RENEGADE 2023
Brand: Jeep Pages: 52

Brands by name

Popular brands

Load more brands