manualshive.com logo in svg

Mercury 2007 Milan, Owner'S Manual

The Mercury 2007 Milan Owner's Manual is essential for getting to know your vehicle better. It provides comprehensive information on maintenance, operation, and troubleshooting, ensuring a smooth and safe driving experience. Download this manual for free at manualshive.com to unlock its full potential.

Share
Download
background image

•

the seat is empty and safety belt is unbuckled.

•

a child or a small person occupies the front passenger seat and the
child or small person is unbuckled.

The front passenger sensing system
uses a

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator which will

illuminate and stay lit to remind you
that the front passenger frontal
airbag is disabled. The indicator
lamp is located in the center stack of the instrument panel above the
radio.

Note

: The indicator lamp will illuminate for a short period of time when

the ignition is turned to the ON position to confirm it is functional.

When the front passenger seat is not occupied (empty seat) or in the
event that the front passenger frontal airbag is enabled (may inflate), the
indicator lamp will be unlit.

The front passenger sensing system is designed to disable (will not
inflate) the front passenger’s frontal airbag when a rear facing infant
seat, a forward-facing child restraint, or a booster seat is detected.

•

When the front passenger sensing system disables (will not inflate)
the front passenger frontal airbag, the indicator lamp will illuminate
and stay lit to remind you that the front passenger frontal airbag is
disabled.

•

If the child restraint has been installed and the indicator lamp is not
lit, then turn the vehicle off, remove the child restraint from the
vehicle and reinstall the restraint following the child restraint
manufacturer’s instructions.

The front passenger sensing system is designed to enable (may inflate)
the front passenger’s frontal airbag anytime the system senses that a
person of adult size is sitting properly in the front passenger seat.

•

When the front passenger sensing system enables the front passenger
frontal airbag (may inflate), the indicator lamp will be unlit and stay
unlit.

If a person of adult size is sitting in the front passenger’s seat, but the

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator lamp is lit, it is

possible that the person isn’t sitting properly in the seat. If this happens:

•

Turn the vehicle off and ask the person to place the seatback in the
full upright position.

2007 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

125

Summary of Contents for 2007 Milan


























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Milan

Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24

Brands by name

Popular brands

Load more brands