manualshive.com logo in svg

Mercury 2007 Milan, Owner'S Manual

The Mercury 2007 Milan Owner's Manual is essential for getting to know your vehicle better. It provides comprehensive information on maintenance, operation, and troubleshooting, ensuring a smooth and safe driving experience. Download this manual for free at manualshive.com to unlock its full potential.

Share
Download
background image

•

2.3L I4 engine

•

3.0L DOHC V6 Duratec engine

•

Do not overfill the engine with oil. Oil levels above this mark

may cause engine damage.

If the engine is overfilled, some oil must be

removed from the engine by an authorized dealer.

7. Put the indicator back in and ensure it is fully seated.

On 2.3L I4 engine, be sure the
notch in the indicator flange is
aligned with the V on the engine
when it is reinserted.

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

2007 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

234

Summary of Contents for 2007 Milan


























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Milan

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
Demco TP20047 Assembly Operation Replacement Parts preview
TP20047
Brand: Demco Pages: 4
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
Kogan CERTA CTCVINCVR14A User Manual preview
CERTA CTCVINCVR14A
Brand: Kogan Pages: 4
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43
E-Lead EL-HA1 Manual preview
EL-HA1
Brand: E-Lead Pages: 11

Brands by name

Popular brands

Load more brands