manualshive.com logo in svg

Mercury 2005 Sable, Owner'S Manual

The Mercury 2005 Sable Owner's Manual is a comprehensive guide that allows you to understand and operate your vehicle efficiently. With our user-friendly website, you can easily download this manual for free. Unlock the full potential of your Sable, visit manualshive.com today and enhance your driving experience.

Share
Download
background image

SAFETY RESTRAINTS

Personal Safety System

The Personal Safety System provides an improved overall level of frontal
crash protection to front seat occupants and is designed to help further
reduce the risk of air bag-related injuries. The system is able to analyze
different occupant classifications and conditions and crash severity
before activating the appropriate safety devices to help better protect a
range of occupants in a variety of frontal crash situations.

Your vehicle’s Personal Safety System consists of:

•

Driver and passenger dual-stage air bag supplemental restraints.

•

Front safety belts with pretensioners, energy management retractors,
and safety belt usage sensors.

•

Driver’s seat position sensor.

•

Front crash severity sensor.

•

Front passenger sensing system

•

Passenger Air Bag Off indicator light.

•

Restraints Control Module (RCM) with impact and safing sensors.

•

Restraint system warning light and back-up tone.

•

The electrical wiring for the air bags, crash sensor(s), safety belt
pretensioners, front safety belt usage sensors, driver seat position
sensor, and indicator lights.

How does the personal safety system work?

The Personal Safety System can adapt the deployment strategy of your
vehicle’s safety devices according to crash severity and occupant
classification and conditions. A collection of crash and occupant sensors
provides information to the Restraints Control Module (RCM). During a
crash, the RCM activates the safety belt pretensioners and/or either
none, one, or both stages of the dual-stage air bag supplemental
restraints based on crash severity and occupant classification and
conditions.

The fact that the pretensioners or air bags did not activate for both front
seat occupants in a collision does not mean that something is wrong with
the system. Rather, it means the Personal Safety System determined the
accident conditions (crash severity, belt usage, etc.) were not
appropriate to activate these safety devices. Front air bags are designed
to activate in frontal and near-frontal collisions (not rollovers, side

REVIEW COPY

2005 Sable

(sab)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Seating and Safety Restraints

92

Summary of Contents for 2005 Sable

























































































































































































































































Reviews:

No comments

Related manuals for 2005 Sable

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
TATA Motors Indigo eCS Owner'S Manual & Service Book preview
Indigo eCS
Brand: TATA Motors Pages: 166
Advanced Diagnostics MVP PRO Manual preview
MVP PRO
Brand: Advanced Diagnostics Pages: 10
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
GROM Audio VLINE Installation Manual preview
VLINE
Brand: GROM Audio Pages: 20

Brands by name

Popular brands

Load more brands