manualshive.com logo in svg

Mercury 2005 Sable, Owner'S Manual

The Mercury 2005 Sable Owner's Manual is a comprehensive guide that allows you to understand and operate your vehicle efficiently. With our user-friendly website, you can easily download this manual for free. Unlock the full potential of your Sable, visit manualshive.com today and enhance your driving experience.

Share
Download
background image

impacts or rear impacts) unless the collision causes sufficient
longitudinal deceleration. The pretensioners are designed to activate in
frontal and near-frontal collisions, and in side collisions when the vehicle
is equipped with side air bags.

Driver and passenger dual-stage air bag supplemental restraints

The dual-stage air bags offer the capability to tailor the level of air bag
inflation energy. A lower, less forceful energy level is provided for more
common, moderate-severity impacts. A higher energy level is used for
the most severe impacts. Refer to

Air bag Supplemental Restraints

section in this chapter.

Front crash severity sensor

The front crash severity sensor enhances the ability to detect the
severity of an impact. Positioned up front, it provides valuable
information early in the crash event on the severity of the impact. This
allows your Personal Safety System to distinguish between different
levels of crash severity and modify the deployment strategy of the
dual-stage air bags and safety belt pretensioners.

Driver’s seat position sensor

The driver’s seat position sensor allows your Personal Safety System to
tailor the deployment level of the driver dual-stage air bag based on seat
position. The system is designed to help protect smaller drivers sitting
close to the driver air bag by providing a lower air bag output level.

Front passenger sensing system

For air bags to do their job they must inflate with great force, and this
force can pose a potentially deadly risk to occupants that are very close
to the air bag when it begins to inflate. For some occupants, like infants
in rear-facing child seats, this occurs because they are initially sitting
very close to the air bag. For other occupants, this occurs when the
occupant is not properly restrained by seat belts or child safety seats and
they move forward during pre-crash braking. The most effective way to
reduce the risk of unnecessary injuries is to make sure all occupants are
properly restrained. Accident statistics suggest that children are much
safer when properly restrained in the rear seating positions than in the
front.

Air bags can kill or injure a child in a child seat.

NEVER

place a

rear-facing child seat in front of an active air bag. If you must

use a forward-facing child seat in the front seat, move the seat all the
way back.

REVIEW COPY

2005 Sable

(sab)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Seating and Safety Restraints

93

Summary of Contents for 2005 Sable

























































































































































































































































Reviews:

No comments

Related manuals for 2005 Sable

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
WABCO OnSide MM16167 Maintenance Manual preview
OnSide MM16167
Brand: WABCO Pages: 52
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
Mobileye C2-270 User Manual preview
C2-270
Brand: Mobileye Pages: 29
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28
Overland Outfitters SHERPA SADDLE BAG JL Installation Instructions preview
SHERPA SADDLE BAG JL
Brand: Overland Outfitters Pages: 2

Brands by name

Popular brands

Load more brands