manualshive.com logo in svg

Mercury 2000 Mystique, Owner'S Manual

The Mercury 2000 Mystique Owner's Manual is a comprehensive guide to help you navigate every aspect of your vehicle. With easy-to-understand instructions and diagrams, this manual ensures a smooth ride. Download your free copy from manualshive.com and unlock the full potential of your Mercury Mystique.

Share
Download
background image

Maintenance and care

180

3. With the parking brake engaged
and your foot on the brake pedal,
start the engine and move the
gearshift lever through all of the
gear ranges. Allow sufficient time
for each gear to engage.

4. Latch the gearshift lever in P
(Park) and leave the engine
running.

5. Remove the dipstick, wiping it
with a clean, dry lint free rag.

6. Install the dipstick making sure
it is fully seated in the filler tube.

7. Remove the dipstick and inspect
the fluid level. The fluid level
should be in the designated areas
for normal and room temperature.

Low fluid level

Do not drive the vehicle  if the fluid
level is below the hole at the
bottom of the dipstick.

Correct fluid level

The transaxle fluid level should be
checked at normal operating
temperatures 66°C - 77°C (150°F -
170°F) on a level surface. The
normal operating temperature can
be reached after approximately 
30 km (20 miles) of driving.

The transaxle fluid should be in
this range if at normal operating
temperature of 66°C - 77°C
(150°F - 170°F).

Do not drive if below this area 

Normal operating temperature
66°C - 77°C (150°F - 170°F)

31MMCen  24.6.99 15:30 Uhr  Seite 180

Summary of Contents for 2000 Mystique

























































































































































































































































Reviews:

No comments

Related manuals for 2000 Mystique

Safe Fleet PRIME DESIGN VCR 326 Assembly Instructions Manual preview
PRIME DESIGN VCR 326
Brand: Safe Fleet Pages: 16
Safe Fleet Prime Design VBC PC11 Quick Start Manual preview
Prime Design VBC PC11
Brand: Safe Fleet Pages: 8
Safe Fleet Prime Design AR1418 Manual preview
Prime Design AR1418
Brand: Safe Fleet Pages: 4
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Brand: Whispbar Pages: 63
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
CITROEN CX 2000 Repair Manual preview
CX 2000
Brand: CITROEN Pages: 394
Waeco MagicComfort MSH50 Installation And Operating Instructions Manual preview
MagicComfort MSH50
Brand: Waeco Pages: 104

Brands by name

Popular brands

Load more brands